Services
Electrical services for your home
Repairs, upgrades and new installs from a licensed local electrician. Each job gets a written price after we see the work.
- Panels and wiring
- Lighting and outlets
- EV chargers and generators

Everything we install and repair
Electrical panel upgrades
Replace an old fuse box or a full, overheating panel with a new one sized for the way your home uses power today.
Outlets, switches and lighting
New outlets, GFCI and USB outlets, dimmers, recessed lights, ceiling fans and fixtures, installed neatly and tested.
Book an outlet or lighting visit about Outlets, switches and lighting
EV charger installation
A dedicated circuit and a wall-mounted Level 2 charger, sized to your panel and installed to code.
Whole-home rewiring
New wiring for older homes with knob and tube, cloth-covered or aluminum wiring, done in phases to keep you living in the house.
Generators and surge protection
Transfer switches, standby and portable generator hookups, and whole-home surge protection at the panel.
Ask about backup power about Generators and surge protection
Safety inspection and troubleshooting
We find the cause of flickering lights, tripping breakers and dead circuits, or give your home a general electrical safety check.
Book an inspection about Safety inspection and troubleshooting
Pricing
How we price common jobs
No two houses are wired the same, so we price after we see yours. Here is what each of these includes.
Safety inspection
Flat price after a site visit
For older homes, buyers and anyone unsure.
- Panel and grounding check
- GFCI and smoke alarm review
- Checks for overloaded circuits
- Written list of findings
Recommended
Panel upgrade
Flat price after a site visit
Replace a fuse box or a full panel.
- Site visit and written price
- Permit and inspection
- New panel and breakers
- Circuits labeled and tested
EV charger install
Flat price after a site visit
Dedicated circuit and wall charger.
- Panel capacity check
- Dedicated circuit
- Charger mounted and wired
- Tested with your vehicle
Permit fees and any panel work needed to carry the new load are listed as separate lines in your written price.
Our promise
Work done right, and to code
We stand behind our work. If something we installed is not right, tell us and we come back to fix it.
- Workmanship guaranteed
- Installed to the electrical code and inspected where required
- No change in price without your approval
Before you book
Is it safe to do electrical work myself?
Changing a light bulb or resetting a breaker is fine. Working inside a panel, adding circuits, or opening walls is not a good place to learn. The panel stays live even with the main off on the utility side, and mistakes cause fires and injuries. If you are unsure, call us before you start.
My breaker keeps tripping. What should I do?
Unplug what is on that circuit, reset the breaker once, and plug things back in one at a time. If it trips again or will not reset, leave it off and call us. Do not tape a breaker in place or swap in a larger one: the wire behind it was sized for the original.
What do I do if an outlet or switch feels warm or smells like burning?
Turn off that circuit at the panel, stop using it, and call us. If you see smoke or flames, get everyone out and call 911 first. Warm outlets are often a loose connection, which is a small fix when caught early.
How do I know if I need a panel upgrade?
Common signs are a fuse box, frequent tripping, no spare breaker slots, a warm or buzzing panel, or a big new load such as an EV charger, heat pump or addition. A site visit tells us for sure, and we will not recommend one you do not need.
Do you pull permits?
Yes, when the work requires one: panel changes, new circuits, EV chargers, generator hookups and rewires typically do. We submit the permit, schedule the inspection and meet the inspector. Simple device swaps usually do not need one.
How long will the power be off for a panel upgrade?
It depends on the home and the utility, so we give you an estimate at the site visit. We schedule the utility disconnect, tell you ahead of time what to expect, and restore power to your circuits as soon as the work passes our tests.
What does an EV charger installation involve?
A site visit to check your panel capacity and plan the wire route, a written price, a permit if required, then a dedicated circuit and a wall-mounted charger. We test it with your vehicle before we leave.
Can I use a generator by plugging it into a wall outlet?
No. That back-feeds the house wiring and the utility line, which can hurt people and damage equipment. A transfer switch or interlock installed by an electrician is the safe way to connect one.
What should I have ready for your visit?
Clear access to the panel and the area we are working in, a note of what is wrong and when it happens, and any earlier inspection reports. If an adult can be home, we can explain the work as we go.
Do you give a price before you start?
Yes. After a site visit we put the scope and the price in writing. If something unexpected shows up behind a wall, we stop, show you, and agree on any change before we continue.
Not sure which service you need?
Describe the problem and we will tell you what we think it is.